Cada equipo tiene sus propias fortalezas y debilidades que pueden ser explotadas o mitigadas mediante estrategias específicas:

Estrategias para Al-Ahli Saudi FC

Mantener una formación defensiva sólida mientras explota rápidamente las oportunidades de contraataque.
Focalizar en mejorar la efectividad ofensiva sin comprometer la solidez defensiva.

Estrategias para Ulsan Hyundai FC

Mantener la posesión del balón para controlar el ritmo del juego y desgastar a los oponentes.
Incorporar jugadas elaboradas que involucren múltiples pases antes de intentar un disparo al arco.

Estrategias para Kashima Antlers

thor-ke/ESP8266<|file_sep|>/esp8266-firmware/esp8266-firmware.ino #include "WiFi.h" #include "NTPClient.h" #include "WiFiUdp.h" #include "HTTPClient.h" #include "TimeLib.h" // Wifi #define WIFI_SSID "" #define WIFI_PASSWORD "" const char* ssid = WIFI_SSID; const char* password = WIFI_PASSWORD; // NTP Server #define NTP_SERVER "0.europe.pool.ntp.org" #define TIME_OFFSET -36000 // timezone offset in seconds from UTC (Berlin = +01:00) #define DAYLIGHT_OFFSET -3600 // daylight savings time offset in seconds from UTC #define UDP_PORT (8888) WiFiUDP ntpUDP; NTPClient timeClient(ntpUDP); // HTTP Server #define HTTP_SERVER "" #define HTTP_ENDPOINT "/api/esp8266/measurements" // DHT22 #define DHTPIN D4 // pin where the data line is connected to #define DHTTYPE DHT22 // DHT22 (AM2302) #include "DHT.h" DHT dht(DHTPIN,DHTTYPE); void setup() { Serial.begin(115200); delay(10); Serial.println(); Serial.println(); Serial.print("Connecting to "); Serial.println(ssid); WiFi.begin(ssid,password); while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print("."); } Serial.println(""); Serial.println("WiFi connected"); Serial.println("IP address: "); Serial.println(WiFi.localIP()); timeClient.begin(); } void loop() { timeClient.update(); // fetch data from DHT22 sensor float h = dht.readHumidity(); float t = dht.readTemperature(); // check if returns are valid if (isnan(h) || isnan(t)) { Serial.println("Failed to read from DHT sensor!"); return; } // create json object with measurements and timestamp String json = "{"timestamp":" + String(timeClient.getEpochTime()) + ","temperature":" + String(t) + ","humidity":" + String(h) + "}"; // send data via http post request to the configured server endpoint HTTPClient http; http.begin(HTTP_SERVER); http.addHeader("Content-Type", "application/json"); int httpResponseCode = http.POST(json); if (httpResponseCode > 0) { Serial.print("HTTP Response code: "); Serial.println(httpResponseCode); String payload = http.getString(); Serial.println(payload); http.end(); delay(30000); // wait for thirty seconds before sending new measurements return; } else { Serial.print("Error code: "); Serial.println(httpResponseCode); http.end(); delay(60000); // wait for sixty seconds before trying again return; } } <|repo_name|>thor-ke/ESP8266<|file_sep|>/README.md # ESP8266 This repository contains an Arduino sketch for the ESP8266 microcontroller which connects to WiFi and periodically sends temperature and humidity measurements to an external server. ## Usage 1. Replace `` and `` in `esp8266-firmware/esp8266-firmware.ino` with your WiFi credentials. 2. Replace `` in `esp8266-firmware/esp8266-firmware.ino` with the URL of your server. ## Build & Upload 1. Make sure that you have installed [Arduino IDE](https://www.arduino.cc/en/software). 2. Clone this repository into your Arduino sketches folder (for example `/home/thor/.arduino15/packages/esp8266/hardware/esp8266//libraries/ESP8266`). 3. Open `esp8266-firmware/esp8266-firmware.ino` in the Arduino IDE. 4. Select your board type (`Tools > Board > Generic ESP8266 Module`) and port (`Tools > Port > COMx`) in the Arduino IDE. 5. Click on the upload button to compile and upload the sketch to your ESP8266 board. <|repo_name|>thor-ke/ESP8266<|file_sep|>/esp8266-firmware/libraries/DHT_sensor_library-master/examples/DHTtester/DHTtester.ino /* * Example sketch for various DHT humidity/temperature sensors * Written by ladyada, public domain. * * Connect pin 1 (on the left) of the sensor to +5V. * NOTE: Use a 'pull-up' resistor between pin 1 and pin 2 (see specs). * Connect pin 2 of the sensor to whatever your DHTPIN is. * Connect pin 4 (on the right) of the sensor to ground. * * If using a board with built-in pull-up resistor: * Connect pin 1 of the sensor to +5V. * Connect pin 2 of the sensor to whatever your DHTPIN is. * Connect pin 4 of the sensor to ground. * * Change DHTPIN to pin # where you connected out of the sensor. * Connect a 10K resistor between pin #2 and pin #1 (addressable pins) * */ #include "DHT.h" // Uncomment whatever type you're using! //#define DHTTYPE DHT11 // DHT 11 #define DHTTYPE DHT22 // DHT 22 (AM2302), AM2321 // For ESP8266 change this line: // #define DHTPIN D4 // What digital pin we're connected to // Initialize DHT sensor for normal use. DHT dht(D4,DHTTYPE); void setup() { Serial.begin(115200); delay(1000); // give everything time to boot up dht.begin(); } void loop() { delay(2000); // Wait a few seconds between measurements. // Reading temperature or humidity takes about 250 milliseconds! // Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor) float h = dht.readHumidity(); // Read temperature as Celsius (the default) float t = dht.readTemperature(); if(isnan(h) || isnan(t)) { Serial.println(F("Failed reading from DHT")); } else { Serial.print(F("Humidity: ")); Serial.print(h); Serial.print(F("% Temperature: ")); Serial.print(t); Serial.println(F("°C ")); } } <|repo_name|>thor-ke/ESP8266<|file_sep|>/esp8266-firmware/libraries/DNSServer-master/examples/dns_test/dns_test.ino /* Copyright (c)2015 Ivan Grokhotkov Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #include "DNSServer.h" #include "ESP8266WiFi.h" #include "WiFiClient.h" const byte DNS_PORT = DNS_PORT; /* DNS server port */ const IPAddress IP_ADDR(192 ,168 ,43 ,43); /* Local IP address */ const IPAddress SUBNET_MASK(255 ,255 ,255 ,0); /* Subnet mask */ const IPAddress GATEWAY_IP(192 ,168 ,43 ,1); /* Gateway IP address */ const char* ssid = ""; /* SSID */ const char* password = ""; /* WiFi password */ /* Change it if you want */ IPAddress DNS_1_IP(8 ,8 ,8 ,8); /* Primary DNS server IP address */ IPAddress DNS_2_IP(8 ,8 ,4 ,4); /* Secondary DNS server IP address */ /* Change it if you want */ IPAddress IP_1_IP(192 ,168 ,43 ,64); /* First virtual IP address */ IPAddress IP_2_IP(192 ,168 ,43 ,65); /* Second virtual IP address */ char hostname[]="hostname"; /* Hostname */ DNSServer dnsServer; /* The DNS Server */ WiFiServer server(DNS_PORT); void setup(void){ Serial.begin(115200); Serial.println(); Serial.print("Configuring access point..."); /* You can remove the password parameter

AFC Champions League Two Group H stats & predictions

Últimas Noticias de la AFC Champions League: Grupo H

Equipos del Grupo H

Análisis de Partidos Recientes

Al-Ahli Saudi FC vs Ulsan Hyundai FC

Kashima Antlers vs Bangkok United FC

Ulsan Hyundai FC vs Kashima Antlers

Bangkok United FC vs Al-Ahli Saudi FC

Predicciones Expertas para Apuestas